Engineering Drawing 1.0.3

Simple notes for engineering drawing.It almost cover all important topics which are indexed chapter wise

1. Representative factor
2. Plain scales
3. Diagonal scales
4. construction of ellipse
5. construction of parabola
6. cycloid
7. epicycloid
8. hypocycloid
9. Involutes
10. Archimedean
11. logarithmic spirals
12. Types of projection
13. Orthographic Projections
14. First and Third Angle Projections
15. Line parallel to a plane
16. Line inclined to a plane
17. Projection of a line parallel to both HP and VP
18. Line perpendicular to HP & parallel to VP
19. Line parallel to VP and inclined to HP
20. Line inclined to HP and VP
21. Rotate the line AB to make it parallel to VP.
22. Projections of planes
23. Plane surface parallel to one plane and perpendicular to the other two
24. Plane parallel to HP and perpendicular to both VP and PP
25. Plane parallel to PP and perpendicular to both HP and VP
26. Plane surface perpendicular to one plane and inclined to the other two
27. Projection of Solids
28. Sections of Solids
29. Visualization of Section Views
30. CUTTING PLANE LINES
31. Placement of Cutting Plane Lines
32. Full Section View
33. Broken-Out Sections
34. Parallel Line Development
35. Radial Line Development
36. Isometric Projection
37. Foreshortening
38. Isometric Scale
39. Alternative Isometric Scale